Загрузить файлы ''

main.c

@@ -21,53 +21,19 @@
 
 /* Private includes ----------------------------------------------------------*/
 /* USER CODE BEGIN Includes */
-#include "ST7735.h"
-#include "GFX_FUNCTIONS.h"
-#include "stm32f4xx_hal.h"
-#include "string.h"
-#include <stdbool.h>
-#include <stdio.h>
-#include <math.h> // Не забудьте подключить библиотеку math.h
-extern unsigned short testImage[];
+#define IN1_PIN GPIO_PIN_6
+#define IN1_PORT GPIOA
+#define IN2_PIN GPIO_PIN_5
+#define IN2_PORT GPIOA
+#define IN3_PIN GPIO_PIN_4
+#define IN3_PORT GPIOA
+#define IN4_PIN GPIO_PIN_3
+#define IN4_PORT GPIOA
 /* USER CODE END Includes */
 
 /* Private typedef -----------------------------------------------------------*/
 /* USER CODE BEGIN PTD */
-#define LED_SCREEN1 HAL_GPIO_WritePin(GPIOA, GPIO_PIN_4, GPIO_PIN_SET);
-#define LED_SCREEN0 HAL_GPIO_WritePin(GPIOA, GPIO_PIN_4, GPIO_PIN_RESET);
-#define RELAY_PIN1 HAL_GPIO_WritePin(GPIOB, GPIO_PIN_14, GPIO_PIN_SET);
-#define RELAY_PIN0 HAL_GPIO_WritePin(GPIOB, GPIO_PIN_14, GPIO_PIN_RESET);
-#define MAX6675_CS1 HAL_GPIO_WritePin(GPIOB, GPIO_PIN_12, GPIO_PIN_SET);
-#define MAX6675_CS0 HAL_GPIO_WritePin(GPIOB, GPIO_PIN_12, GPIO_PIN_RESET);
-#define Speak_CS1 HAL_GPIO_WritePin(GPIOB, GPIO_PIN_13, GPIO_PIN_SET);
-#define Speak_CS0 HAL_GPIO_WritePin(GPIOB, GPIO_PIN_13, GPIO_PIN_RESET);
-float Kp = 3.0;
-float Ki = 0.0;
-float Kd = 2.9;
-volatile uint16_t data3;
-volatile uint16_t data2 = 0;
-volatile uint16_t data4 = 100;
-volatile uint16_t data5;
-uint8_t data8[2];
-
-volatile bool encFlag = 1;
-float integral = 0;
-float last_error = 0;
-volatile int counter = 0;
-float last_output = 0.0;
-float second_last_output = 0.0;
-volatile bool oscillating = false;
-char buffer[100] = {0};
-char buffer1[100] = {0};
-char buffer3[10] = {0};
-volatile bool err1 = 0;
-uint8_t hours = 0;
-uint8_t minutes = 30;
-uint8_t seconds = 0;
-volatile bool speak_flag = 0;
-volatile bool speak_flag1 = 0;
-volatile bool timer_running = 0;
-float current_temperature;
+
 /* USER CODE END PTD */
 
 /* Private define ------------------------------------------------------------*/
@@ -81,8 +47,7 @@ float current_temperature;
 /* USER CODE END PM */
 
 /* Private variables ---------------------------------------------------------*/
-SPI_HandleTypeDef hspi1;
-SPI_HandleTypeDef hspi2;
+TIM_HandleTypeDef htim1;
 
 /* USER CODE BEGIN PV */
 
@@ -91,68 +56,112 @@ SPI_HandleTypeDef hspi2;
 /* Private function prototypes -----------------------------------------------*/
 void SystemClock_Config(void);
 static void MX_GPIO_Init(void);
-static void MX_SPI1_Init(void);
-static void MX_SPI2_Init(void);
-
+static void MX_TIM1_Init(void);
 /* USER CODE BEGIN PFP */
 
 /* USER CODE END PFP */
 
 /* Private user code ---------------------------------------------------------*/
 /* USER CODE BEGIN 0 */
-uint16_t ReadTemperature(void){
-        	 MAX6675_CS0;
-        	      HAL_SPI_Receive(&hspi2, data8, 2, 100);
-        	      int16_t temp = ((data8[1] << 8) | data8[0]) >> 3;
-        	      MAX6675_CS1;
-        	    float temperature = (float)temp * 0.25;
-        	    static float temp_filtered = 0;
-        	        float alpha = 0.1;
-        	        temp_filtered = (1 - alpha) * temp_filtered + alpha * temperature;
-        	        return temp_filtered;
-
-    }
-char buffer2[8] = {0};
-void IndicationERR1(){
-	ST7735_SetRotation(1);
-	fillRect(5, 93, 100, 19, WHITE);
-	ST7735_SetRotation(1);
-	ST7735_WriteString(50, 93, "ERR1", Font_11x18, RED, WHITE);
-	err1 = 1;
-	HAL_Delay(500);
-
-	}
-	void IndicationERR2(){
-
-	ST7735_SetRotation(1);
-	fillRect(5, 93, 100, 19, WHITE);
-	ST7735_SetRotation(1);
-	ST7735_WriteString(50, 93, "ERR2", Font_11x18, RED, WHITE);
-	err1 = 1;
-	HAL_Delay(500);
-	//Buzzer_Peak();
-	}
-	void beep(void) {
-		Speak_CS1;
-		HAL_Delay(10);
-	    Speak_CS0;
-	}
-
-	void Speak_Stop(void) {
-		Speak_CS1;
-		HAL_Delay(700);
-		Speak_CS0;
-		HAL_Delay(300);
-		Speak_CS1;
-		HAL_Delay(700);
-		Speak_CS0;
-		HAL_Delay(300);
-		Speak_CS1;
-		HAL_Delay(700);
-		Speak_CS0;
-
-	}
+void microDelay (uint16_t delay)
+{
+  __HAL_TIM_SET_COUNTER(&htim1, 0);
+  while (__HAL_TIM_GET_COUNTER(&htim1) < delay);
+}
+
+void stepCCV (int steps, uint16_t delay) // CCV - Counter Clockwise
+{
+  for(int x=0; x<steps; x=x+1)
+  {
+    HAL_GPIO_WritePin(IN1_PORT, IN1_PIN, GPIO_PIN_SET);   // IN1
+    HAL_GPIO_WritePin(IN2_PORT, IN2_PIN, GPIO_PIN_RESET); // IN2
+    HAL_GPIO_WritePin(IN3_PORT, IN3_PIN, GPIO_PIN_RESET); // IN3
+    HAL_GPIO_WritePin(IN4_PORT, IN4_PIN, GPIO_PIN_RESET); // IN4
+    microDelay(delay);
+    HAL_GPIO_WritePin(IN1_PORT, IN1_PIN, GPIO_PIN_SET);   // IN1
+    HAL_GPIO_WritePin(IN2_PORT, IN2_PIN, GPIO_PIN_SET);   // IN2
+    HAL_GPIO_WritePin(IN3_PORT, IN3_PIN, GPIO_PIN_RESET); // IN3
+    HAL_GPIO_WritePin(IN4_PORT, IN4_PIN, GPIO_PIN_RESET); // IN4
+    microDelay(delay);
+    HAL_GPIO_WritePin(IN1_PORT, IN1_PIN, GPIO_PIN_RESET); // IN1
+    HAL_GPIO_WritePin(IN2_PORT, IN2_PIN, GPIO_PIN_SET);   // IN2
+    HAL_GPIO_WritePin(IN3_PORT, IN3_PIN, GPIO_PIN_RESET); // IN3
+    HAL_GPIO_WritePin(IN4_PORT, IN4_PIN, GPIO_PIN_RESET); // IN4
+    microDelay(delay);
+    HAL_GPIO_WritePin(IN1_PORT, IN1_PIN, GPIO_PIN_RESET); // IN1
+    HAL_GPIO_WritePin(IN2_PORT, IN2_PIN, GPIO_PIN_SET);   // IN2
+    HAL_GPIO_WritePin(IN3_PORT, IN3_PIN, GPIO_PIN_SET);   // IN3
+    HAL_GPIO_WritePin(IN4_PORT, IN4_PIN, GPIO_PIN_RESET); // IN4
+    microDelay(delay);
+    HAL_GPIO_WritePin(IN1_PORT, IN1_PIN, GPIO_PIN_RESET); // IN1
+    HAL_GPIO_WritePin(IN2_PORT, IN2_PIN, GPIO_PIN_RESET); // IN2
+    HAL_GPIO_WritePin(IN3_PORT, IN3_PIN, GPIO_PIN_SET);   // IN3
+    HAL_GPIO_WritePin(IN4_PORT, IN4_PIN, GPIO_PIN_RESET); // IN4
+    microDelay(delay);
+    HAL_GPIO_WritePin(IN1_PORT, IN1_PIN, GPIO_PIN_RESET); // IN1
+    HAL_GPIO_WritePin(IN2_PORT, IN2_PIN, GPIO_PIN_RESET); // IN2
+    HAL_GPIO_WritePin(IN3_PORT, IN3_PIN, GPIO_PIN_SET);   // IN3
+    HAL_GPIO_WritePin(IN4_PORT, IN4_PIN, GPIO_PIN_SET);   // IN4
+    microDelay(delay);
+    HAL_GPIO_WritePin(IN1_PORT, IN1_PIN, GPIO_PIN_RESET); // IN1
+    HAL_GPIO_WritePin(IN2_PORT, IN2_PIN, GPIO_PIN_RESET); // IN2
+    HAL_GPIO_WritePin(IN3_PORT, IN3_PIN, GPIO_PIN_RESET); // IN3
+    HAL_GPIO_WritePin(IN4_PORT, IN4_PIN, GPIO_PIN_SET);   // IN4
+    microDelay(delay);
+    HAL_GPIO_WritePin(IN1_PORT, IN1_PIN, GPIO_PIN_SET);   // IN1
+    HAL_GPIO_WritePin(IN2_PORT, IN2_PIN, GPIO_PIN_RESET); // IN2
+    HAL_GPIO_WritePin(IN3_PORT, IN3_PIN, GPIO_PIN_RESET); // IN3
+    HAL_GPIO_WritePin(IN4_PORT, IN4_PIN, GPIO_PIN_SET);   // IN4
+    microDelay(delay);
+  }
+}
 
+void stepCV (int steps, uint16_t delay) // CV - Clockwise
+{
+  for(int x=0; x<steps; x=x+1)
+  {
+    HAL_GPIO_WritePin(IN1_PORT, IN1_PIN, GPIO_PIN_SET);   // IN1
+    HAL_GPIO_WritePin(IN2_PORT, IN2_PIN, GPIO_PIN_RESET); // IN2
+    HAL_GPIO_WritePin(IN3_PORT, IN3_PIN, GPIO_PIN_RESET); // IN3
+    HAL_GPIO_WritePin(IN4_PORT, IN4_PIN, GPIO_PIN_SET);   // IN4
+    microDelay(delay);
+    HAL_GPIO_WritePin(IN1_PORT, IN1_PIN, GPIO_PIN_RESET); // IN1
+    HAL_GPIO_WritePin(IN2_PORT, IN2_PIN, GPIO_PIN_RESET); // IN2
+    HAL_GPIO_WritePin(IN3_PORT, IN3_PIN, GPIO_PIN_RESET); // IN3
+    HAL_GPIO_WritePin(IN4_PORT, IN4_PIN, GPIO_PIN_SET);   // IN4
+    microDelay(delay);
+    HAL_GPIO_WritePin(IN1_PORT, IN1_PIN, GPIO_PIN_RESET); // IN1
+    HAL_GPIO_WritePin(IN2_PORT, IN2_PIN, GPIO_PIN_RESET); // IN2
+    HAL_GPIO_WritePin(IN3_PORT, IN3_PIN, GPIO_PIN_SET);   // IN3
+    HAL_GPIO_WritePin(IN4_PORT, IN4_PIN, GPIO_PIN_SET);   // IN4
+    microDelay(delay);
+    HAL_GPIO_WritePin(IN1_PORT, IN1_PIN, GPIO_PIN_RESET); // IN1
+    HAL_GPIO_WritePin(IN2_PORT, IN2_PIN, GPIO_PIN_RESET); // IN2
+    HAL_GPIO_WritePin(IN3_PORT, IN3_PIN, GPIO_PIN_SET);   // IN3
+    HAL_GPIO_WritePin(IN4_PORT, IN4_PIN, GPIO_PIN_RESET); // IN4
+    microDelay(delay);
+    HAL_GPIO_WritePin(IN1_PORT, IN1_PIN, GPIO_PIN_RESET); // IN1
+    HAL_GPIO_WritePin(IN2_PORT, IN2_PIN, GPIO_PIN_SET);   // IN2
+    HAL_GPIO_WritePin(IN3_PORT, IN3_PIN, GPIO_PIN_SET);   // IN3
+    HAL_GPIO_WritePin(IN4_PORT, IN4_PIN, GPIO_PIN_RESET); // IN4
+    microDelay(delay);
+    HAL_GPIO_WritePin(IN1_PORT, IN1_PIN, GPIO_PIN_RESET); // IN1
+    HAL_GPIO_WritePin(IN2_PORT, IN2_PIN, GPIO_PIN_SET);   // IN2
+    HAL_GPIO_WritePin(IN3_PORT, IN3_PIN, GPIO_PIN_RESET); // IN3
+    HAL_GPIO_WritePin(IN4_PORT, IN4_PIN, GPIO_PIN_RESET); // IN4
+    microDelay(delay);
+    HAL_GPIO_WritePin(IN1_PORT, IN1_PIN, GPIO_PIN_SET);   // IN1
+    HAL_GPIO_WritePin(IN2_PORT, IN2_PIN, GPIO_PIN_SET);   // IN2
+    HAL_GPIO_WritePin(IN3_PORT, IN3_PIN, GPIO_PIN_RESET); // IN3
+    HAL_GPIO_WritePin(IN4_PORT, IN4_PIN, GPIO_PIN_RESET); // IN4
+    microDelay(delay);
+    HAL_GPIO_WritePin(IN1_PORT, IN1_PIN, GPIO_PIN_SET);   // IN1
+    HAL_GPIO_WritePin(IN2_PORT, IN2_PIN, GPIO_PIN_RESET); // IN2
+    HAL_GPIO_WritePin(IN3_PORT, IN3_PIN, GPIO_PIN_RESET); // IN3
+    HAL_GPIO_WritePin(IN4_PORT, IN4_PIN, GPIO_PIN_RESET); // IN4
+    microDelay(delay);
+  }
+}
 /* USER CODE END 0 */
 
 /**
@@ -184,40 +193,12 @@ int main(void)
 
   /* Initialize all configured peripherals */
   MX_GPIO_Init();
-  MX_SPI1_Init();
-  MX_SPI2_Init();
+  MX_TIM1_Init();
   /* USER CODE BEGIN 2 */
-  LED_SCREEN0;
-  ST7735_Init(0);
-  RELAY_PIN0;
-    fillScreen(BLACK);
-    HAL_Delay(200);
-    LED_SCREEN1;
-       ST7735_SetRotation(1);
-       ST7735_SetBackgroundImage(0, 0, 160, 128, testImage);
-       HAL_Delay(10000);
-       ST7735_SetRotation(2);
-           fillScreen(WHITE);
-
-
-           ST7735_SetRotation(1);
-                           	 ST7735_FillRectangle(0, 0, 160, 24, RED);
-                           	 //HAL_Delay(300);
-
-               ST7735_SetRotation(3);
-                           	   ST7735_FillRectangle(0, 0, 160, 15, WHITE);
-
-                           	 //  HAL_Delay(300);
-
-                           	   ST7735_SetRotation(1);
-                           	   sprintf(buffer2, "TEK");
-                           	   ST7735_WriteString(20, 5, buffer2, Font_11x18, WHITE, RED);
-                           	   ST7735_SetRotation(1);
-                           	   ST7735_WriteString(110, 5, "YCT", Font_11x18, WHITE, RED);
-                           	 //  HAL_Delay(100);
-
-                           	   //ST7735_SetRotation(1);
-                           	   //ST7735_WriteString(5, 117, "bitcom63.ru          v1.2", Font_6x8, BLACK, WHITE);
+  HAL_TIM_Base_Start(&htim1);  // Start Timer 1
+  /* use like delay */
+
+
 
   /* USER CODE END 2 */
 
@@ -226,261 +207,20 @@ int main(void)
   while (1)
   {
     /* USER CODE END WHILE */
-	  float current_temperature = ReadTemperature();
-	  	 	  	  data3 = ReadTemperature();
-
-	  	 	  	  sprintf(buffer, "%d ", data3);
-	  	 	  	  	 	  	  	  	  	   	 ST7735_SetRotation(1);
-	  	 	  	  	 	  	  	  	  	   	 	  	  	  	    ST7735_WriteString(10, 40, buffer, Font_16x26, RED, WHITE);
-	  	 	  	  	 	  	  	  	  	   	 	 HAL_Delay(100);
-	  	 	  if (encFlag) {
-
-	  	 	   	       	  data2 = counter;
-	  	 	   	 sprintf(buffer1, "%d ", data2);
-	  	 	   	 ST7735_SetRotation(1);
-	  	 	   	 	  	  	  	    ST7735_WriteString(100, 40, buffer1, Font_16x26, BLACK, WHITE);
-	  	 	   	 	  	encFlag = 0;
-	  	 	   	 	  	HAL_Delay(10);
-	  	 	   	        }
-	  	 sprintf(buffer3, "%02d:%02d:%02d ", hours, minutes, seconds);
-	  	 ST7735_SetRotation(1);
-	  	 ST7735_WriteString(10, 70, buffer3, Font_11x18, RED, WHITE);
-	  	 static uint32_t last_time4 = 0;
-	  //if (data3 < 2){
-	  	 	 	  	  	 	 	  	  	//	IndicationERR2();
-	  	 	 	  	  	 	 	  	  //	timer_running = false;
-	  	 	 	  	  	 	 	//hours=0;
-	  	 	 	  	  	 	 	//	 	minutes=0;
-	  	 	 	  	  	 	 		 	//seconds =0;
-
-	  	 	 	  	  	 	 	  	  	  	  	        		  	          //RELAY_PIN0;
-	  	 	 	  	  	 	 	  	  	  	  	        //  }else{timer_running=true;
-	  	 	 	  	  	 	 	  	  	  	  	        //  err1 = 0;}
-
-
-	  	 if (timer_running == true && err1 == 0) {
-
-
-	  	     /* USER CODE END WHILE */
-
-	  	 	 	  	  	  if (counter > 0){
-	  	 	 	  	  	  if (data3 > counter + 100){
-	  	 	 	  	  		IndicationERR1();
-	  	 	 	  	  		err1= 1;
-	  	 	 	  	  	timer_running = false;
-
-	  	 	 	  	  	  	  	        		  	          RELAY_PIN0;
-	  	 	 	  	  	  	  	        		  	hours=0;
-	  	 	 	  	  	  	  	        		  		 	minutes=0;
-	  	 	 	  	  	  	  	        		  		 	seconds =0;
-	  	 	 	  	  	  	  	          }else{timer_running=true;
-	  	 	 	  	  	  	  	          err1 = 0;}
-
-	  	 	 	  	  	  }
-
-
-
-	  	 	 	  	  	  	          float error = counter - current_temperature;
-	  	 	 	  	  	  	          float P = Kp * error;
-	  	 	 	  	  	  	          integral += error;
-	  	 	 	  	  	  	          float I = Ki *  integral;
-	  	 	 	  	  	  	          float D = Kd * (error - last_error);
-	  	 	 	  	  	  	          last_error = error;
-	  	 	 	  	  	  	          float output = P + I + D;
-	  	 	 	  	  	  	          if (output > 0) {
-	  	 	 	  	  	  	     //  if (err1 = 0){
-	  	 	 	  	  	  	             RELAY_PIN1;
-	  	 	 	  	  	  	             err1 = 0;
-	  	 	 	  	  	  	        ST7735_SetRotation(1);
-	  	 	 	  	  	  	        ST7735_WriteString(5, 93, "HAGPEB", Font_11x18, RED, WHITE);
-	  	 	 	  	  	  	     //  }
-
-	  	 	 	  	  	  	          } else {
-	  	 	 	  	  	  	             RELAY_PIN0;
-	  	 	 	  	  	  	     //err1 = 1;
-	  	 	 	  	  	  	        ST7735_SetRotation(1);
-	  	 	 	  	  	  	        fillRect(5, 93, 100, 19, WHITE);
-
-
-	  	 	 	  	  	  	          }
-
-
-
-	  	 	 	  	  	  	   if (hours == 0 && minutes == 0 && seconds == 0) {
-	  	 	 	  	  	  	       timer_running = false; // Остановить таймер
-	  	 	 	  	  	  	fillRect(5, 93, 100, 19, WHITE);
-	  	 	 	  	  	  	       Speak_Stop();
-	  	 	 	  	  	  	   } else {
-	  	 	 	  	  	  	if (HAL_GetTick() - last_time4 >= 900) { // Каждые 100 мс
-	  	 	 	  	  	  		  	 	 	  		  		  			  	 	 	  	  	  		  	        last_time4 = HAL_GetTick();
-	  	 	 	  	  	  	       if (seconds == 0 && err1 ==0) {
-	  	 	 	  	  	  	           if (minutes == 0) {
-	  	 	 	  	  	  	               if (hours > 0) {
-	  	 	 	  	  	  	                   hours--;
-	  	 	 	  	  	  	                   minutes = 59; // Сбрасываем минуты на 59
-	  	 	 	  	  	  	                   seconds = 59; // Сбрасываем секунды на 59
-	  	 	 	  	  	  	               }
-	  	 	 	  	  	  	           } else {
-	  	 	 	  	  	  	               minutes--;
-	  	 	 	  	  	  	               seconds = 59; // Сбрасываем секунды на 59
-	  	 	 	  	  	  	           }
-	  	 	 	  	  	  	       } else {
-	  	 	 	  	  	  	           seconds--; // Уменьшаем секунды
-	  	 	 	  	  	  	       }
-	  	 	 	  	  	  	     }
-	  	 	 	  	  	  	   }
-	  	 	 	  	  	  	 }else {
-	  	 	 	  	  	 RELAY_PIN0;
-	  	 	 	  	  	  	ST7735_SetRotation(1);
-
-	  	 	 	  	  	  		 	  	  	  	        	  	  	  	        fillRect(5, 93, 100, 19, WHITE);
-	  	 	 	  	  	  	 }
-
-	  	 if(counter<=5 && timer_running==true){
-	  	 	timer_running=false;
-	  	 	hours=0;
-	  	 	minutes=0;
-	  	 	seconds =0;
-	  	 	Speak_Stop();
-	  	 }
-	  	 if (hours == 0 && minutes == 10 && seconds == 0) {
-	  	 	Speak_CS1;
-	  	 		HAL_Delay(500);
-	  	 		Speak_CS0;
-
-	  	 }
-	  	 if (hours == 0 && minutes == 5 && seconds == 0) {
-	  	 	 	Speak_CS1;
-	  	 	 		HAL_Delay(500);
-	  	 	 		Speak_CS0;
-	  	 	 		Speak_CS1;
-	  	 	 		HAL_Delay(500);
-	  	 	 		Speak_CS0;
-
-	  	 	 }
-	  	 if (speak_flag) {
-	  	 	HAL_Delay(100);
-	  	     Speak_CS1;
-	  	     HAL_Delay(700); // Здесь можно использовать задержку, так как это не блокирует прерывание
-	  	    Speak_CS0;
-	  	     speak_flag = 0; // Сбросить флаг
-	  	 }
-	  	     if (speak_flag1) {
-	  	         Speak_CS1;
-	  	       HAL_Delay(100);
-	  	        Speak_CS0;
-	  	         speak_flag1 = 0;
-	  	 }
-
-
-	  	 	HAL_Delay(100);
+
     /* USER CODE BEGIN 3 */
-	 // testAll();
+	  stepCCV(80, 1000);  // 256 half revolution
+	      HAL_Delay(10000);
+	      stepCV(80, 1000); // 128 quarter revolution
+	      HAL_Delay(1000);
+	      stepCV(80, 1000); // 128 quarter revolution
+	      	      HAL_Delay(10000);
+	      	    stepCCV(80, 1000);  // 256 half revolution
+	      	    	      HAL_Delay(1000);
   }
-  //HAL_Delay(100);
   /* USER CODE END 3 */
 }
-void HAL_GPIO_EXTI_Callback(uint16_t GPIO_Pin) {
-    static uint32_t last_interrupt_time = 0;
-    uint32_t current_time = HAL_GetTick();
-    static uint32_t last_interrupt_time1 = 0;
-    uint32_t current_time1 = HAL_GetTick();
-
-    if (GPIO_Pin == BTN__Pin) {
-    	if (timer_running == 0){
-        if (current_time - last_interrupt_time > 250) {
-
-            if (counter - 5 >= 0) {
-            	//Buzzer_Peak();
-            	counter -= 5;
-                encFlag = 1;
-                speak_flag1 = 1;
-
-            }
-        	}
-
-        }
-
-    }
-
-
-    else if (GPIO_Pin == BTN_A11_Pin) {
-    	if (timer_running == 0){
-        if (current_time - last_interrupt_time > 250) {
-
-            if (counter + 5 <= 200) {
-                counter += 5;
-                encFlag = 1;
-                speak_flag1 = 1;
-               // Buzzer_Peak();
-            }
-        	}
-        }
-
-
-    }
-    else if (GPIO_Pin == BTN_S_S_Pin) {
-    	if (timer_running == 0){
-    	if (current_time1 - last_interrupt_time1 > 250) {
-
-    	    		if (minutes < 1440) {
-    	    			speak_flag1 = 1;// Максимальное время 30 минут
-    	    		        if (minutes > 29) {
-    	    		            hours++;
-    	    		            minutes = 0;
-    	    		            seconds = 0;
-    	    		        } else {
-    	    		            minutes +=30;
-    	    		        }
-    	    		    }
-    	    		if (hours==24 && minutes>0){
-    	    									hours=0;
-    	    			    		            minutes = 0;
-    	    			    		            seconds = 0;
-    	    		}
-    		}
-    	    	}
-
-    	}
-    else if (GPIO_Pin == BTN_T_Pin && counter>5) { // Замените на ваш пин
-    	if (current_time - last_interrupt_time > 250) {
-            timer_running = !timer_running; // Переключить состояние таймера
-            speak_flag = 1;
-        }
-    }
-
-
-
-    last_interrupt_time = current_time;
-    last_interrupt_time1 = current_time1;
 
-}
-void EXTI9_5_IRQHandler(void)
-{
-  /* USER CODE BEGIN EXTI9_5_IRQn 0 */
-
-  /* USER CODE END EXTI9_5_IRQn 0 */
-  HAL_GPIO_EXTI_IRQHandler(BTN_T_Pin);
-  /* USER CODE BEGIN EXTI9_5_IRQn 1 */
-
-  /* USER CODE END EXTI9_5_IRQn 1 */
-}
-
-/**
-  * @brief This function handles EXTI line[15:10] interrupts.
-  */
-void EXTI15_10_IRQHandler(void)
-{
-  /* USER CODE BEGIN EXTI15_10_IRQn 0 */
-
-  /* USER CODE END EXTI15_10_IRQn 0 */
-  HAL_GPIO_EXTI_IRQHandler(BTN__Pin);
-  HAL_GPIO_EXTI_IRQHandler(BTN_A11_Pin);
-  HAL_GPIO_EXTI_IRQHandler(BTN_S_S_Pin);
-  /* USER CODE BEGIN EXTI15_10_IRQn 1 */
-
-  /* USER CODE END EXTI15_10_IRQn 1 */
-}
 /**
   * @brief System Clock Configuration
   * @retval None
@@ -493,18 +233,17 @@ void SystemClock_Config(void)
   /** Configure the main internal regulator output voltage
   */
   __HAL_RCC_PWR_CLK_ENABLE();
-  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE2);
+  __HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
 
   /** Initializes the RCC Oscillators according to the specified parameters
   * in the RCC_OscInitTypeDef structure.
   */
-  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
-  RCC_OscInitStruct.HSIState = RCC_HSI_ON;
-  RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
+  RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
+  RCC_OscInitStruct.HSEState = RCC_HSE_ON;
   RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
-  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSI;
-  RCC_OscInitStruct.PLL.PLLM = 8;
-  RCC_OscInitStruct.PLL.PLLN = 84;
+  RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
+  RCC_OscInitStruct.PLL.PLLM = 4;
+  RCC_OscInitStruct.PLL.PLLN = 72;
   RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
   RCC_OscInitStruct.PLL.PLLQ = 4;
   if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
@@ -528,85 +267,50 @@ void SystemClock_Config(void)
 }
 
 /**
-  * @brief SPI1 Initialization Function
+  * @brief TIM1 Initialization Function
   * @param None
   * @retval None
   */
-static void MX_SPI1_Init(void)
+static void MX_TIM1_Init(void)
 {
 
-  /* USER CODE BEGIN SPI1_Init 0 */
-
-  /* USER CODE END SPI1_Init 0 */
-
-  /* USER CODE BEGIN SPI1_Init 1 */
-
-  /* USER CODE END SPI1_Init 1 */
-  /* SPI1 parameter configuration*/
-  hspi1.Instance = SPI1;
-  hspi1.Init.Mode = SPI_MODE_MASTER;
-  hspi1.Init.Direction = SPI_DIRECTION_2LINES;
-  hspi1.Init.DataSize = SPI_DATASIZE_8BIT;
-  hspi1.Init.CLKPolarity = SPI_POLARITY_LOW;
-  hspi1.Init.CLKPhase = SPI_PHASE_1EDGE;
-  hspi1.Init.NSS = SPI_NSS_SOFT;
-  hspi1.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_8;
-  hspi1.Init.FirstBit = SPI_FIRSTBIT_MSB;
-  hspi1.Init.TIMode = SPI_TIMODE_DISABLE;
-  hspi1.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
-  hspi1.Init.CRCPolynomial = 10;
-  if (HAL_SPI_Init(&hspi1) != HAL_OK)
-  {
-    Error_Handler();
-  }
-  /* USER CODE BEGIN SPI1_Init 2 */
+  /* USER CODE BEGIN TIM1_Init 0 */
 
-  /* USER CODE END SPI1_Init 2 */
+  /* USER CODE END TIM1_Init 0 */
 
-}
+  TIM_ClockConfigTypeDef sClockSourceConfig = {0};
+  TIM_MasterConfigTypeDef sMasterConfig = {0};
 
-/**
-  * @brief SPI2 Initialization Function
-  * @param None
-  * @retval None
-  */
-static void MX_SPI2_Init(void)
-{
+  /* USER CODE BEGIN TIM1_Init 1 */
 
-  /* USER CODE BEGIN SPI2_Init 0 */
-
-  /* USER CODE END SPI2_Init 0 */
-
-  /* USER CODE BEGIN SPI2_Init 1 */
-
-  /* USER CODE END SPI2_Init 1 */
-  /* SPI2 parameter configuration*/
-  hspi2.Instance = SPI2;
-  hspi2.Init.Mode = SPI_MODE_MASTER;
-  hspi2.Init.Direction = SPI_DIRECTION_2LINES_RXONLY;
-  hspi2.Init.DataSize = SPI_DATASIZE_8BIT;
-  hspi2.Init.CLKPolarity = SPI_POLARITY_LOW;
-  hspi2.Init.CLKPhase = SPI_PHASE_1EDGE;
-  hspi2.Init.NSS = SPI_NSS_SOFT;
-  hspi2.Init.BaudRatePrescaler = SPI_BAUDRATEPRESCALER_8;
-  hspi2.Init.FirstBit = SPI_FIRSTBIT_MSB;
-  hspi2.Init.TIMode = SPI_TIMODE_DISABLE;
-  hspi2.Init.CRCCalculation = SPI_CRCCALCULATION_DISABLE;
-  hspi2.Init.CRCPolynomial = 10;
-  if (HAL_SPI_Init(&hspi2) != HAL_OK)
+  /* USER CODE END TIM1_Init 1 */
+  htim1.Instance = TIM1;
+  htim1.Init.Prescaler = 71;
+  htim1.Init.CounterMode = TIM_COUNTERMODE_UP;
+  htim1.Init.Period = 65535;
+  htim1.Init.ClockDivision = TIM_CLOCKDIVISION_DIV1;
+  htim1.Init.RepetitionCounter = 0;
+  htim1.Init.AutoReloadPreload = TIM_AUTORELOAD_PRELOAD_DISABLE;
+  if (HAL_TIM_Base_Init(&htim1) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  sClockSourceConfig.ClockSource = TIM_CLOCKSOURCE_INTERNAL;
+  if (HAL_TIM_ConfigClockSource(&htim1, &sClockSourceConfig) != HAL_OK)
   {
     Error_Handler();
   }
-  /* USER CODE BEGIN SPI2_Init 2 */
+  sMasterConfig.MasterOutputTrigger = TIM_TRGO_RESET;
+  sMasterConfig.MasterSlaveMode = TIM_MASTERSLAVEMODE_DISABLE;
+  if (HAL_TIMEx_MasterConfigSynchronization(&htim1, &sMasterConfig) != HAL_OK)
+  {
+    Error_Handler();
+  }
+  /* USER CODE BEGIN TIM1_Init 2 */
 
-  /* USER CODE END SPI2_Init 2 */
+  /* USER CODE END TIM1_Init 2 */
 
 }
-  /* USER CODE BEGIN SPI2_Init 2 */
-
-  /* USER CODE END SPI2_Init 2 */
-
-
 
 /**
   * @brief GPIO Initialization Function
@@ -627,60 +331,26 @@ static void MX_GPIO_Init(void)
   __HAL_RCC_GPIOB_CLK_ENABLE();
 
   /*Configure GPIO pin Output Level */
-  HAL_GPIO_WritePin(GPIOC, GPIO_PIN_15, GPIO_PIN_RESET);
-
-  /*Configure GPIO pin Output Level */
-  HAL_GPIO_WritePin(SPI1_LED_GPIO_Port, SPI1_LED_Pin, GPIO_PIN_RESET);
+  HAL_GPIO_WritePin(GPIOA, GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6, GPIO_PIN_RESET);
 
-  /*Configure GPIO pin Output Level */
-  HAL_GPIO_WritePin(GPIOB, SPI1_DC_Pin|SPI1_CS_Pin|SP1_RESET_Pin|SPI2_CS_Pin
-                          |SPEAK_Pin|GPIO_PIN_14, GPIO_PIN_RESET);
-
-  /*Configure GPIO pin : PC15 */
-  GPIO_InitStruct.Pin = GPIO_PIN_15;
-  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
-  GPIO_InitStruct.Pull = GPIO_PULLUP;
-  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-  HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
-
-  /*Configure GPIO pin : SPI1_LED_Pin */
-  GPIO_InitStruct.Pin = SPI1_LED_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
-  GPIO_InitStruct.Pull = GPIO_PULLUP;
-  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-  HAL_GPIO_Init(SPI1_LED_GPIO_Port, &GPIO_InitStruct);
-
-  /*Configure GPIO pins : SPI1_DC_Pin SPI1_CS_Pin SP1_RESET_Pin SPI2_CS_Pin */
-  GPIO_InitStruct.Pin = SPI1_DC_Pin|SPI1_CS_Pin|SP1_RESET_Pin|SPI2_CS_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
+  /*Configure GPIO pin : B1_Pin */
+  GPIO_InitStruct.Pin = B1_Pin;
+  GPIO_InitStruct.Mode = GPIO_MODE_IT_FALLING;
   GPIO_InitStruct.Pull = GPIO_NOPULL;
-  GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
+  HAL_GPIO_Init(B1_GPIO_Port, &GPIO_InitStruct);
 
-  /*Configure GPIO pins : SPEAK_Pin PB14 */
-  GPIO_InitStruct.Pin = SPEAK_Pin|GPIO_PIN_14;
+  /*Configure GPIO pins : PA3 PA4 PA5 PA6 */
+  GPIO_InitStruct.Pin = GPIO_PIN_3|GPIO_PIN_4|GPIO_PIN_5|GPIO_PIN_6;
   GPIO_InitStruct.Mode = GPIO_MODE_OUTPUT_PP;
-  GPIO_InitStruct.Pull = GPIO_PULLUP;
+  GPIO_InitStruct.Pull = GPIO_NOPULL;
   GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_LOW;
-  HAL_GPIO_Init(GPIOB, &GPIO_InitStruct);
-
-  /*Configure GPIO pins : BTN_T_Pin BTN__Pin BTN_A11_Pin BTN_S_S_Pin */
-  GPIO_InitStruct.Pin = BTN_T_Pin|BTN__Pin|BTN_A11_Pin|BTN_S_S_Pin;
-  GPIO_InitStruct.Mode = GPIO_MODE_IT_RISING;
-  GPIO_InitStruct.Pull = GPIO_PULLUP;
   HAL_GPIO_Init(GPIOA, &GPIO_InitStruct);
 
-  /* EXTI interrupt init*/
-  HAL_NVIC_SetPriority(EXTI9_5_IRQn, 0, 0);
-  HAL_NVIC_EnableIRQ(EXTI9_5_IRQn);
-
-  HAL_NVIC_SetPriority(EXTI15_10_IRQn, 0, 0);
-  HAL_NVIC_EnableIRQ(EXTI15_10_IRQn);
-
   /* USER CODE BEGIN MX_GPIO_Init_2 */
 
   /* USER CODE END MX_GPIO_Init_2 */
 }
+
 /* USER CODE BEGIN 4 */
 
 /* USER CODE END 4 */

main.h

@@ -57,30 +57,14 @@ void Error_Handler(void);
 /* USER CODE END EFP */
 
 /* Private defines -----------------------------------------------------------*/
-#define SPI1_LED_Pin GPIO_PIN_4
-#define SPI1_LED_GPIO_Port GPIOA
-#define SPI1_DC_Pin GPIO_PIN_0
-#define SPI1_DC_GPIO_Port GPIOB
-#define SPI1_CS_Pin GPIO_PIN_1
-#define SPI1_CS_GPIO_Port GPIOB
-#define SP1_RESET_Pin GPIO_PIN_2
-#define SP1_RESET_GPIO_Port GPIOB
-#define SPI2_CS_Pin GPIO_PIN_12
-#define SPI2_CS_GPIO_Port GPIOB
-#define SPEAK_Pin GPIO_PIN_13
-#define SPEAK_GPIO_Port GPIOB
-#define BTN_T_Pin GPIO_PIN_9
-#define BTN_T_GPIO_Port GPIOA
-#define BTN_T_EXTI_IRQn EXTI9_5_IRQn
-#define BTN__Pin GPIO_PIN_10
-#define BTN__GPIO_Port GPIOA
-#define BTN__EXTI_IRQn EXTI15_10_IRQn
-#define BTN_A11_Pin GPIO_PIN_11
-#define BTN_A11_GPIO_Port GPIOA
-#define BTN_A11_EXTI_IRQn EXTI15_10_IRQn
-#define BTN_S_S_Pin GPIO_PIN_12
-#define BTN_S_S_GPIO_Port GPIOA
-#define BTN_S_S_EXTI_IRQn EXTI15_10_IRQn
+#define B1_Pin GPIO_PIN_13
+#define B1_GPIO_Port GPIOC
+#define TMS_Pin GPIO_PIN_13
+#define TMS_GPIO_Port GPIOA
+#define TCK_Pin GPIO_PIN_14
+#define TCK_GPIO_Port GPIOA
+#define SWO_Pin GPIO_PIN_3
+#define SWO_GPIO_Port GPIOB
 
 /* USER CODE BEGIN Private defines */
 

startup_stm32f411retx.s

@@ -0,0 +1,438 @@
+/**
+  ******************************************************************************
+  * @file      startup_stm32f411xe.s
+  * @author    MCD Application Team
+  * @brief     STM32F411xExx Devices vector table for GCC based toolchains. 
+  *            This module performs:
+  *                - Set the initial SP
+  *                - Set the initial PC == Reset_Handler,
+  *                - Set the vector table entries with the exceptions ISR address
+  *                - Branches to main in the C library (which eventually
+  *                  calls main()).
+  *            After Reset the Cortex-M4 processor is in Thread mode,
+  *            priority is Privileged, and the Stack is set to Main.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+    
+  .syntax unified
+  .cpu cortex-m4
+  .fpu softvfp
+  .thumb
+
+.global  g_pfnVectors
+.global  Default_Handler
+
+/* start address for the initialization values of the .data section. 
+defined in linker script */
+.word  _sidata
+/* start address for the .data section. defined in linker script */  
+.word  _sdata
+/* end address for the .data section. defined in linker script */
+.word  _edata
+/* start address for the .bss section. defined in linker script */
+.word  _sbss
+/* end address for the .bss section. defined in linker script */
+.word  _ebss
+/* stack used for SystemInit_ExtMemCtl; always internal RAM used */
+
+/**
+ * @brief  This is the code that gets called when the processor first
+ *          starts execution following a reset event. Only the absolutely
+ *          necessary set is performed, after which the application
+ *          supplied main() routine is called. 
+ * @param  None
+ * @retval : None
+*/
+
+    .section  .text.Reset_Handler
+  .weak  Reset_Handler
+  .type  Reset_Handler, %function
+Reset_Handler:  
+  ldr   sp, =_estack    		 /* set stack pointer */
+
+/* Call the clock system initialization function.*/
+  bl  SystemInit   
+
+/* Copy the data segment initializers from flash to SRAM */  
+  ldr r0, =_sdata
+  ldr r1, =_edata
+  ldr r2, =_sidata
+  movs r3, #0
+  b LoopCopyDataInit
+
+CopyDataInit:
+  ldr r4, [r2, r3]
+  str r4, [r0, r3]
+  adds r3, r3, #4
+
+LoopCopyDataInit:
+  adds r4, r0, r3
+  cmp r4, r1
+  bcc CopyDataInit
+  
+/* Zero fill the bss segment. */
+  ldr r2, =_sbss
+  ldr r4, =_ebss
+  movs r3, #0
+  b LoopFillZerobss
+
+FillZerobss:
+  str  r3, [r2]
+  adds r2, r2, #4
+
+LoopFillZerobss:
+  cmp r2, r4
+  bcc FillZerobss
+
+/* Call static constructors */
+    bl __libc_init_array
+/* Call the application's entry point.*/
+  bl  main
+  bx  lr    
+.size  Reset_Handler, .-Reset_Handler
+
+/**
+ * @brief  This is the code that gets called when the processor receives an 
+ *         unexpected interrupt.  This simply enters an infinite loop, preserving
+ *         the system state for examination by a debugger.
+ * @param  None     
+ * @retval None       
+*/
+    .section  .text.Default_Handler,"ax",%progbits
+Default_Handler:
+Infinite_Loop:
+  b  Infinite_Loop
+  .size  Default_Handler, .-Default_Handler
+/******************************************************************************
+*
+* The minimal vector table for a Cortex M3. Note that the proper constructs
+* must be placed on this to ensure that it ends up at physical address
+* 0x0000.0000.
+* 
+*******************************************************************************/
+   .section  .isr_vector,"a",%progbits
+  .type  g_pfnVectors, %object
+    
+g_pfnVectors:
+  .word  _estack
+  .word  Reset_Handler
+  .word  NMI_Handler
+  .word  HardFault_Handler
+  .word  MemManage_Handler
+  .word  BusFault_Handler
+  .word  UsageFault_Handler
+  .word  0
+  .word  0
+  .word  0
+  .word  0
+  .word  SVC_Handler
+  .word  DebugMon_Handler
+  .word  0
+  .word  PendSV_Handler
+  .word  SysTick_Handler
+  
+  /* External Interrupts */
+  .word     WWDG_IRQHandler                   /* Window WatchDog              */                                        
+  .word     PVD_IRQHandler                    /* PVD through EXTI Line detection */                        
+  .word     TAMP_STAMP_IRQHandler             /* Tamper and TimeStamps through the EXTI line */            
+  .word     RTC_WKUP_IRQHandler               /* RTC Wakeup through the EXTI line */                      
+  .word     FLASH_IRQHandler                  /* FLASH                        */                                          
+  .word     RCC_IRQHandler                    /* RCC                          */                                            
+  .word     EXTI0_IRQHandler                  /* EXTI Line0                   */                        
+  .word     EXTI1_IRQHandler                  /* EXTI Line1                   */                          
+  .word     EXTI2_IRQHandler                  /* EXTI Line2                   */                          
+  .word     EXTI3_IRQHandler                  /* EXTI Line3                   */                          
+  .word     EXTI4_IRQHandler                  /* EXTI Line4                   */                          
+  .word     DMA1_Stream0_IRQHandler           /* DMA1 Stream 0                */                  
+  .word     DMA1_Stream1_IRQHandler           /* DMA1 Stream 1                */                   
+  .word     DMA1_Stream2_IRQHandler           /* DMA1 Stream 2                */                   
+  .word     DMA1_Stream3_IRQHandler           /* DMA1 Stream 3                */                   
+  .word     DMA1_Stream4_IRQHandler           /* DMA1 Stream 4                */                   
+  .word     DMA1_Stream5_IRQHandler           /* DMA1 Stream 5                */                   
+  .word     DMA1_Stream6_IRQHandler           /* DMA1 Stream 6                */                   
+  .word     ADC_IRQHandler                    /* ADC1, ADC2 and ADC3s         */                   
+  .word     0               				  /* Reserved                      */                         
+  .word     0              					  /* Reserved                     */                          
+  .word     0                                 /* Reserved                     */                          
+  .word     0                                 /* Reserved                     */                          
+  .word     EXTI9_5_IRQHandler                /* External Line[9:5]s          */                          
+  .word     TIM1_BRK_TIM9_IRQHandler          /* TIM1 Break and TIM9          */         
+  .word     TIM1_UP_TIM10_IRQHandler          /* TIM1 Update and TIM10        */         
+  .word     TIM1_TRG_COM_TIM11_IRQHandler     /* TIM1 Trigger and Commutation and TIM11 */
+  .word     TIM1_CC_IRQHandler                /* TIM1 Capture Compare         */                          
+  .word     TIM2_IRQHandler                   /* TIM2                         */                   
+  .word     TIM3_IRQHandler                   /* TIM3                         */                   
+  .word     TIM4_IRQHandler                   /* TIM4                         */                   
+  .word     I2C1_EV_IRQHandler                /* I2C1 Event                   */                          
+  .word     I2C1_ER_IRQHandler                /* I2C1 Error                   */                          
+  .word     I2C2_EV_IRQHandler                /* I2C2 Event                   */                          
+  .word     I2C2_ER_IRQHandler                /* I2C2 Error                   */                            
+  .word     SPI1_IRQHandler                   /* SPI1                         */                   
+  .word     SPI2_IRQHandler                   /* SPI2                         */                   
+  .word     USART1_IRQHandler                 /* USART1                       */                   
+  .word     USART2_IRQHandler                 /* USART2                       */                   
+  .word     0               				  /* Reserved                       */                   
+  .word     EXTI15_10_IRQHandler              /* External Line[15:10]s        */                          
+  .word     RTC_Alarm_IRQHandler              /* RTC Alarm (A and B) through EXTI Line */                 
+  .word     OTG_FS_WKUP_IRQHandler            /* USB OTG FS Wakeup through EXTI line */                       
+  .word     0                                 /* Reserved     				  */         
+  .word     0                                 /* Reserved       			  */         
+  .word     0                                 /* Reserved 					  */
+  .word     0                                 /* Reserved                     */                          
+  .word     DMA1_Stream7_IRQHandler           /* DMA1 Stream7                 */                          
+  .word     0                                 /* Reserved                     */                   
+  .word     SDIO_IRQHandler                   /* SDIO                         */                   
+  .word     TIM5_IRQHandler                   /* TIM5                         */                   
+  .word     SPI3_IRQHandler                   /* SPI3                         */                   
+  .word     0                                 /* Reserved                     */                   
+  .word     0                                 /* Reserved                     */                   
+  .word     0                                 /* Reserved                     */                   
+  .word     0                                 /* Reserved                     */
+  .word     DMA2_Stream0_IRQHandler           /* DMA2 Stream 0                */                   
+  .word     DMA2_Stream1_IRQHandler           /* DMA2 Stream 1                */                   
+  .word     DMA2_Stream2_IRQHandler           /* DMA2 Stream 2                */                   
+  .word     DMA2_Stream3_IRQHandler           /* DMA2 Stream 3                */                   
+  .word     DMA2_Stream4_IRQHandler           /* DMA2 Stream 4                */                   
+  .word     0                    			  /* Reserved                     */                   
+  .word     0              					  /* Reserved                     */                     
+  .word     0              					  /* Reserved                     */                          
+  .word     0             					  /* Reserved                     */                          
+  .word     0              					  /* Reserved                     */                          
+  .word     0              					  /* Reserved                     */                          
+  .word     OTG_FS_IRQHandler                 /* USB OTG FS                   */                   
+  .word     DMA2_Stream5_IRQHandler           /* DMA2 Stream 5                */                   
+  .word     DMA2_Stream6_IRQHandler           /* DMA2 Stream 6                */                   
+  .word     DMA2_Stream7_IRQHandler           /* DMA2 Stream 7                */                   
+  .word     USART6_IRQHandler                 /* USART6                       */                    
+  .word     I2C3_EV_IRQHandler                /* I2C3 event                   */                          
+  .word     I2C3_ER_IRQHandler                /* I2C3 error                   */                          
+  .word     0                                 /* Reserved                     */                   
+  .word     0                                 /* Reserved                     */                   
+  .word     0                                 /* Reserved                     */                         
+  .word     0                                 /* Reserved                     */                   
+  .word     0                                 /* Reserved                     */                   
+  .word     0                                 /* Reserved                     */                   
+  .word     0                                 /* Reserved                     */
+  .word     FPU_IRQHandler                    /* FPU                          */
+  .word     0                                 /* Reserved                     */                   
+  .word     0                                 /* Reserved                     */
+  .word     SPI4_IRQHandler                   /* SPI4                         */
+  .word     SPI5_IRQHandler                   /* SPI5                         */  
+                    
+
+  .size  g_pfnVectors, .-g_pfnVectors
+
+/*******************************************************************************
+*
+* Provide weak aliases for each Exception handler to the Default_Handler. 
+* As they are weak aliases, any function with the same name will override 
+* this definition.
+* 
+*******************************************************************************/
+   .weak      NMI_Handler
+   .thumb_set NMI_Handler,Default_Handler
+  
+   .weak      HardFault_Handler
+   .thumb_set HardFault_Handler,Default_Handler
+  
+   .weak      MemManage_Handler
+   .thumb_set MemManage_Handler,Default_Handler
+  
+   .weak      BusFault_Handler
+   .thumb_set BusFault_Handler,Default_Handler
+
+   .weak      UsageFault_Handler
+   .thumb_set UsageFault_Handler,Default_Handler
+
+   .weak      SVC_Handler
+   .thumb_set SVC_Handler,Default_Handler
+
+   .weak      DebugMon_Handler
+   .thumb_set DebugMon_Handler,Default_Handler
+
+   .weak      PendSV_Handler
+   .thumb_set PendSV_Handler,Default_Handler
+
+   .weak      SysTick_Handler
+   .thumb_set SysTick_Handler,Default_Handler              
+  
+   .weak      WWDG_IRQHandler                   
+   .thumb_set WWDG_IRQHandler,Default_Handler      
+                  
+   .weak      PVD_IRQHandler      
+   .thumb_set PVD_IRQHandler,Default_Handler
+               
+   .weak      TAMP_STAMP_IRQHandler            
+   .thumb_set TAMP_STAMP_IRQHandler,Default_Handler
+            
+   .weak      RTC_WKUP_IRQHandler                  
+   .thumb_set RTC_WKUP_IRQHandler,Default_Handler
+            
+   .weak      FLASH_IRQHandler         
+   .thumb_set FLASH_IRQHandler,Default_Handler
+                  
+   .weak      RCC_IRQHandler      
+   .thumb_set RCC_IRQHandler,Default_Handler
+                  
+   .weak      EXTI0_IRQHandler         
+   .thumb_set EXTI0_IRQHandler,Default_Handler
+                  
+   .weak      EXTI1_IRQHandler         
+   .thumb_set EXTI1_IRQHandler,Default_Handler
+                     
+   .weak      EXTI2_IRQHandler         
+   .thumb_set EXTI2_IRQHandler,Default_Handler 
+                 
+   .weak      EXTI3_IRQHandler         
+   .thumb_set EXTI3_IRQHandler,Default_Handler
+                        
+   .weak      EXTI4_IRQHandler         
+   .thumb_set EXTI4_IRQHandler,Default_Handler
+                  
+   .weak      DMA1_Stream0_IRQHandler               
+   .thumb_set DMA1_Stream0_IRQHandler,Default_Handler
+         
+   .weak      DMA1_Stream1_IRQHandler               
+   .thumb_set DMA1_Stream1_IRQHandler,Default_Handler
+                  
+   .weak      DMA1_Stream2_IRQHandler               
+   .thumb_set DMA1_Stream2_IRQHandler,Default_Handler
+                  
+   .weak      DMA1_Stream3_IRQHandler               
+   .thumb_set DMA1_Stream3_IRQHandler,Default_Handler 
+                 
+   .weak      DMA1_Stream4_IRQHandler              
+   .thumb_set DMA1_Stream4_IRQHandler,Default_Handler
+                  
+   .weak      DMA1_Stream5_IRQHandler               
+   .thumb_set DMA1_Stream5_IRQHandler,Default_Handler
+                  
+   .weak      DMA1_Stream6_IRQHandler               
+   .thumb_set DMA1_Stream6_IRQHandler,Default_Handler
+                  
+   .weak      ADC_IRQHandler      
+   .thumb_set ADC_IRQHandler,Default_Handler
+            
+   .weak      EXTI9_5_IRQHandler   
+   .thumb_set EXTI9_5_IRQHandler,Default_Handler
+            
+   .weak      TIM1_BRK_TIM9_IRQHandler            
+   .thumb_set TIM1_BRK_TIM9_IRQHandler,Default_Handler
+            
+   .weak      TIM1_UP_TIM10_IRQHandler            
+   .thumb_set TIM1_UP_TIM10_IRQHandler,Default_Handler
+      
+   .weak      TIM1_TRG_COM_TIM11_IRQHandler      
+   .thumb_set TIM1_TRG_COM_TIM11_IRQHandler,Default_Handler
+      
+   .weak      TIM1_CC_IRQHandler   
+   .thumb_set TIM1_CC_IRQHandler,Default_Handler
+                  
+   .weak      TIM2_IRQHandler            
+   .thumb_set TIM2_IRQHandler,Default_Handler
+                  
+   .weak      TIM3_IRQHandler            
+   .thumb_set TIM3_IRQHandler,Default_Handler
+                  
+   .weak      TIM4_IRQHandler            
+   .thumb_set TIM4_IRQHandler,Default_Handler
+                  
+   .weak      I2C1_EV_IRQHandler   
+   .thumb_set I2C1_EV_IRQHandler,Default_Handler
+                     
+   .weak      I2C1_ER_IRQHandler   
+   .thumb_set I2C1_ER_IRQHandler,Default_Handler
+                     
+   .weak      I2C2_EV_IRQHandler   
+   .thumb_set I2C2_EV_IRQHandler,Default_Handler
+                  
+   .weak      I2C2_ER_IRQHandler   
+   .thumb_set I2C2_ER_IRQHandler,Default_Handler
+                           
+   .weak      SPI1_IRQHandler            
+   .thumb_set SPI1_IRQHandler,Default_Handler
+                        
+   .weak      SPI2_IRQHandler            
+   .thumb_set SPI2_IRQHandler,Default_Handler
+                  
+   .weak      USART1_IRQHandler      
+   .thumb_set USART1_IRQHandler,Default_Handler
+                     
+   .weak      USART2_IRQHandler      
+   .thumb_set USART2_IRQHandler,Default_Handler
+                                  
+   .weak      EXTI15_10_IRQHandler               
+   .thumb_set EXTI15_10_IRQHandler,Default_Handler
+               
+   .weak      RTC_Alarm_IRQHandler               
+   .thumb_set RTC_Alarm_IRQHandler,Default_Handler
+            
+   .weak      OTG_FS_WKUP_IRQHandler         
+   .thumb_set OTG_FS_WKUP_IRQHandler,Default_Handler
+            
+   .weak      DMA1_Stream7_IRQHandler               
+   .thumb_set DMA1_Stream7_IRQHandler,Default_Handler
+                     
+   .weak      SDIO_IRQHandler            
+   .thumb_set SDIO_IRQHandler,Default_Handler
+                     
+   .weak      TIM5_IRQHandler            
+   .thumb_set TIM5_IRQHandler,Default_Handler
+                     
+   .weak      SPI3_IRQHandler            
+   .thumb_set SPI3_IRQHandler,Default_Handler
+                     
+   .weak      DMA2_Stream0_IRQHandler               
+   .thumb_set DMA2_Stream0_IRQHandler,Default_Handler
+               
+   .weak      DMA2_Stream1_IRQHandler               
+   .thumb_set DMA2_Stream1_IRQHandler,Default_Handler
+                  
+   .weak      DMA2_Stream2_IRQHandler               
+   .thumb_set DMA2_Stream2_IRQHandler,Default_Handler
+            
+   .weak      DMA2_Stream3_IRQHandler               
+   .thumb_set DMA2_Stream3_IRQHandler,Default_Handler
+            
+   .weak      DMA2_Stream4_IRQHandler               
+   .thumb_set DMA2_Stream4_IRQHandler,Default_Handler
+            
+   .weak      OTG_FS_IRQHandler      
+   .thumb_set OTG_FS_IRQHandler,Default_Handler
+                     
+   .weak      DMA2_Stream5_IRQHandler               
+   .thumb_set DMA2_Stream5_IRQHandler,Default_Handler
+                  
+   .weak      DMA2_Stream6_IRQHandler               
+   .thumb_set DMA2_Stream6_IRQHandler,Default_Handler
+                  
+   .weak      DMA2_Stream7_IRQHandler               
+   .thumb_set DMA2_Stream7_IRQHandler,Default_Handler
+                  
+   .weak      USART6_IRQHandler      
+   .thumb_set USART6_IRQHandler,Default_Handler
+                        
+   .weak      I2C3_EV_IRQHandler   
+   .thumb_set I2C3_EV_IRQHandler,Default_Handler
+                        
+   .weak      I2C3_ER_IRQHandler   
+   .thumb_set I2C3_ER_IRQHandler,Default_Handler
+                        
+   .weak      FPU_IRQHandler                  
+   .thumb_set FPU_IRQHandler,Default_Handler  
+
+   .weak      SPI4_IRQHandler                  
+   .thumb_set SPI4_IRQHandler,Default_Handler
+
+   .weak      SPI5_IRQHandler                  
+   .thumb_set SPI5_IRQHandler,Default_Handler    

stm32f4xx_hal_conf.h

@@ -0,0 +1,495 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_hal_conf_template.h
+  * @author  MCD Application Team
+  * @brief   HAL configuration template file.
+  *          This file should be copied to the application folder and renamed
+  *          to stm32f4xx_hal_conf.h.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2017 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_HAL_CONF_H
+#define __STM32F4xx_HAL_CONF_H
+
+#ifdef __cplusplus
+ extern "C" {
+#endif
+
+/* Exported types ------------------------------------------------------------*/
+/* Exported constants --------------------------------------------------------*/
+
+/* ########################## Module Selection ############################## */
+/**
+  * @brief This is the list of modules to be used in the HAL driver
+  */
+#define HAL_MODULE_ENABLED
+
+  /* #define HAL_CRYP_MODULE_ENABLED */
+/* #define HAL_ADC_MODULE_ENABLED */
+/* #define HAL_CAN_MODULE_ENABLED */
+/* #define HAL_CRC_MODULE_ENABLED */
+/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
+/* #define HAL_DAC_MODULE_ENABLED */
+/* #define HAL_DCMI_MODULE_ENABLED */
+/* #define HAL_DMA2D_MODULE_ENABLED */
+/* #define HAL_ETH_MODULE_ENABLED */
+/* #define HAL_ETH_LEGACY_MODULE_ENABLED */
+/* #define HAL_NAND_MODULE_ENABLED */
+/* #define HAL_NOR_MODULE_ENABLED */
+/* #define HAL_PCCARD_MODULE_ENABLED */
+/* #define HAL_SRAM_MODULE_ENABLED */
+/* #define HAL_SDRAM_MODULE_ENABLED */
+/* #define HAL_HASH_MODULE_ENABLED */
+/* #define HAL_I2C_MODULE_ENABLED */
+/* #define HAL_I2S_MODULE_ENABLED */
+/* #define HAL_IWDG_MODULE_ENABLED */
+/* #define HAL_LTDC_MODULE_ENABLED */
+/* #define HAL_RNG_MODULE_ENABLED */
+/* #define HAL_RTC_MODULE_ENABLED */
+/* #define HAL_SAI_MODULE_ENABLED */
+/* #define HAL_SD_MODULE_ENABLED */
+/* #define HAL_MMC_MODULE_ENABLED */
+/* #define HAL_SPI_MODULE_ENABLED */
+#define HAL_TIM_MODULE_ENABLED
+/* #define HAL_UART_MODULE_ENABLED */
+/* #define HAL_USART_MODULE_ENABLED */
+/* #define HAL_IRDA_MODULE_ENABLED */
+/* #define HAL_SMARTCARD_MODULE_ENABLED */
+/* #define HAL_SMBUS_MODULE_ENABLED */
+/* #define HAL_WWDG_MODULE_ENABLED */
+/* #define HAL_PCD_MODULE_ENABLED */
+/* #define HAL_HCD_MODULE_ENABLED */
+/* #define HAL_DSI_MODULE_ENABLED */
+/* #define HAL_QSPI_MODULE_ENABLED */
+/* #define HAL_QSPI_MODULE_ENABLED */
+/* #define HAL_CEC_MODULE_ENABLED */
+/* #define HAL_FMPI2C_MODULE_ENABLED */
+/* #define HAL_FMPSMBUS_MODULE_ENABLED */
+/* #define HAL_SPDIFRX_MODULE_ENABLED */
+/* #define HAL_DFSDM_MODULE_ENABLED */
+/* #define HAL_LPTIM_MODULE_ENABLED */
+#define HAL_GPIO_MODULE_ENABLED
+#define HAL_EXTI_MODULE_ENABLED
+#define HAL_DMA_MODULE_ENABLED
+#define HAL_RCC_MODULE_ENABLED
+#define HAL_FLASH_MODULE_ENABLED
+#define HAL_PWR_MODULE_ENABLED
+#define HAL_CORTEX_MODULE_ENABLED
+
+/* ########################## HSE/HSI Values adaptation ##################### */
+/**
+  * @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSE is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSE_VALUE)
+  #define HSE_VALUE    8000000U /*!< Value of the External oscillator in Hz */
+#endif /* HSE_VALUE */
+
+#if !defined  (HSE_STARTUP_TIMEOUT)
+  #define HSE_STARTUP_TIMEOUT    100U   /*!< Time out for HSE start up, in ms */
+#endif /* HSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief Internal High Speed oscillator (HSI) value.
+  *        This value is used by the RCC HAL module to compute the system frequency
+  *        (when HSI is used as system clock source, directly or through the PLL).
+  */
+#if !defined  (HSI_VALUE)
+  #define HSI_VALUE    ((uint32_t)16000000U) /*!< Value of the Internal oscillator in Hz*/
+#endif /* HSI_VALUE */
+
+/**
+  * @brief Internal Low Speed oscillator (LSI) value.
+  */
+#if !defined  (LSI_VALUE)
+ #define LSI_VALUE  32000U       /*!< LSI Typical Value in Hz*/
+#endif /* LSI_VALUE */                      /*!< Value of the Internal Low Speed oscillator in Hz
+                                             The real value may vary depending on the variations
+                                             in voltage and temperature.*/
+/**
+  * @brief External Low Speed oscillator (LSE) value.
+  */
+#if !defined  (LSE_VALUE)
+ #define LSE_VALUE  32768U    /*!< Value of the External Low Speed oscillator in Hz */
+#endif /* LSE_VALUE */
+
+#if !defined  (LSE_STARTUP_TIMEOUT)
+  #define LSE_STARTUP_TIMEOUT    5000U   /*!< Time out for LSE start up, in ms */
+#endif /* LSE_STARTUP_TIMEOUT */
+
+/**
+  * @brief External clock source for I2S peripheral
+  *        This value is used by the I2S HAL module to compute the I2S clock source
+  *        frequency, this source is inserted directly through I2S_CKIN pad.
+  */
+#if !defined  (EXTERNAL_CLOCK_VALUE)
+  #define EXTERNAL_CLOCK_VALUE    12288000U /*!< Value of the External audio frequency in Hz*/
+#endif /* EXTERNAL_CLOCK_VALUE */
+
+/* Tip: To avoid modifying this file each time you need to use different HSE,
+   ===  you can define the HSE value in your toolchain compiler preprocessor. */
+
+/* ########################### System Configuration ######################### */
+/**
+  * @brief This is the HAL system configuration section
+  */
+#define  VDD_VALUE		      3300U /*!< Value of VDD in mv */
+#define  TICK_INT_PRIORITY            0U   /*!< tick interrupt priority */
+#define  USE_RTOS                     0U
+#define  PREFETCH_ENABLE              1U
+#define  INSTRUCTION_CACHE_ENABLE     1U
+#define  DATA_CACHE_ENABLE            1U
+
+#define  USE_HAL_ADC_REGISTER_CALLBACKS         0U /* ADC register callback disabled       */
+#define  USE_HAL_CAN_REGISTER_CALLBACKS         0U /* CAN register callback disabled       */
+#define  USE_HAL_CEC_REGISTER_CALLBACKS         0U /* CEC register callback disabled       */
+#define  USE_HAL_CRYP_REGISTER_CALLBACKS        0U /* CRYP register callback disabled      */
+#define  USE_HAL_DAC_REGISTER_CALLBACKS         0U /* DAC register callback disabled       */
+#define  USE_HAL_DCMI_REGISTER_CALLBACKS        0U /* DCMI register callback disabled      */
+#define  USE_HAL_DFSDM_REGISTER_CALLBACKS       0U /* DFSDM register callback disabled     */
+#define  USE_HAL_DMA2D_REGISTER_CALLBACKS       0U /* DMA2D register callback disabled     */
+#define  USE_HAL_DSI_REGISTER_CALLBACKS         0U /* DSI register callback disabled       */
+#define  USE_HAL_ETH_REGISTER_CALLBACKS         0U /* ETH register callback disabled       */
+#define  USE_HAL_HASH_REGISTER_CALLBACKS        0U /* HASH register callback disabled      */
+#define  USE_HAL_HCD_REGISTER_CALLBACKS         0U /* HCD register callback disabled       */
+#define  USE_HAL_I2C_REGISTER_CALLBACKS         0U /* I2C register callback disabled       */
+#define  USE_HAL_FMPI2C_REGISTER_CALLBACKS      0U /* FMPI2C register callback disabled    */
+#define  USE_HAL_FMPSMBUS_REGISTER_CALLBACKS    0U /* FMPSMBUS register callback disabled  */
+#define  USE_HAL_I2S_REGISTER_CALLBACKS         0U /* I2S register callback disabled       */
+#define  USE_HAL_IRDA_REGISTER_CALLBACKS        0U /* IRDA register callback disabled      */
+#define  USE_HAL_LPTIM_REGISTER_CALLBACKS       0U /* LPTIM register callback disabled     */
+#define  USE_HAL_LTDC_REGISTER_CALLBACKS        0U /* LTDC register callback disabled      */
+#define  USE_HAL_MMC_REGISTER_CALLBACKS         0U /* MMC register callback disabled       */
+#define  USE_HAL_NAND_REGISTER_CALLBACKS        0U /* NAND register callback disabled      */
+#define  USE_HAL_NOR_REGISTER_CALLBACKS         0U /* NOR register callback disabled       */
+#define  USE_HAL_PCCARD_REGISTER_CALLBACKS      0U /* PCCARD register callback disabled    */
+#define  USE_HAL_PCD_REGISTER_CALLBACKS         0U /* PCD register callback disabled       */
+#define  USE_HAL_QSPI_REGISTER_CALLBACKS        0U /* QSPI register callback disabled      */
+#define  USE_HAL_RNG_REGISTER_CALLBACKS         0U /* RNG register callback disabled       */
+#define  USE_HAL_RTC_REGISTER_CALLBACKS         0U /* RTC register callback disabled       */
+#define  USE_HAL_SAI_REGISTER_CALLBACKS         0U /* SAI register callback disabled       */
+#define  USE_HAL_SD_REGISTER_CALLBACKS          0U /* SD register callback disabled        */
+#define  USE_HAL_SMARTCARD_REGISTER_CALLBACKS   0U /* SMARTCARD register callback disabled */
+#define  USE_HAL_SDRAM_REGISTER_CALLBACKS       0U /* SDRAM register callback disabled     */
+#define  USE_HAL_SRAM_REGISTER_CALLBACKS        0U /* SRAM register callback disabled      */
+#define  USE_HAL_SPDIFRX_REGISTER_CALLBACKS     0U /* SPDIFRX register callback disabled   */
+#define  USE_HAL_SMBUS_REGISTER_CALLBACKS       0U /* SMBUS register callback disabled     */
+#define  USE_HAL_SPI_REGISTER_CALLBACKS         0U /* SPI register callback disabled       */
+#define  USE_HAL_TIM_REGISTER_CALLBACKS         0U /* TIM register callback disabled       */
+#define  USE_HAL_UART_REGISTER_CALLBACKS        0U /* UART register callback disabled      */
+#define  USE_HAL_USART_REGISTER_CALLBACKS       0U /* USART register callback disabled     */
+#define  USE_HAL_WWDG_REGISTER_CALLBACKS        0U /* WWDG register callback disabled      */
+
+/* ########################## Assert Selection ############################## */
+/**
+  * @brief Uncomment the line below to expanse the "assert_param" macro in the
+  *        HAL drivers code
+  */
+/* #define USE_FULL_ASSERT    1U */
+
+/* ################## Ethernet peripheral configuration ##################### */
+
+/* Section 1 : Ethernet peripheral configuration */
+
+/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
+#define MAC_ADDR0   2U
+#define MAC_ADDR1   0U
+#define MAC_ADDR2   0U
+#define MAC_ADDR3   0U
+#define MAC_ADDR4   0U
+#define MAC_ADDR5   0U
+
+/* Definition of the Ethernet driver buffers size and count */
+#define ETH_RX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for receive               */
+#define ETH_TX_BUF_SIZE                ETH_MAX_PACKET_SIZE /* buffer size for transmit              */
+#define ETH_RXBUFNB                    4U       /* 4 Rx buffers of size ETH_RX_BUF_SIZE  */
+#define ETH_TXBUFNB                    4U       /* 4 Tx buffers of size ETH_TX_BUF_SIZE  */
+
+/* Section 2: PHY configuration section */
+
+/* DP83848_PHY_ADDRESS Address*/
+#define DP83848_PHY_ADDRESS
+/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
+#define PHY_RESET_DELAY                 0x000000FFU
+/* PHY Configuration delay */
+#define PHY_CONFIG_DELAY                0x00000FFFU
+
+#define PHY_READ_TO                     0x0000FFFFU
+#define PHY_WRITE_TO                    0x0000FFFFU
+
+/* Section 3: Common PHY Registers */
+
+#define PHY_BCR                         ((uint16_t)0x0000U)    /*!< Transceiver Basic Control Register   */
+#define PHY_BSR                         ((uint16_t)0x0001U)    /*!< Transceiver Basic Status Register    */
+
+#define PHY_RESET                       ((uint16_t)0x8000U)  /*!< PHY Reset */
+#define PHY_LOOPBACK                    ((uint16_t)0x4000U)  /*!< Select loop-back mode */
+#define PHY_FULLDUPLEX_100M             ((uint16_t)0x2100U)  /*!< Set the full-duplex mode at 100 Mb/s */
+#define PHY_HALFDUPLEX_100M             ((uint16_t)0x2000U)  /*!< Set the half-duplex mode at 100 Mb/s */
+#define PHY_FULLDUPLEX_10M              ((uint16_t)0x0100U)  /*!< Set the full-duplex mode at 10 Mb/s  */
+#define PHY_HALFDUPLEX_10M              ((uint16_t)0x0000U)  /*!< Set the half-duplex mode at 10 Mb/s  */
+#define PHY_AUTONEGOTIATION             ((uint16_t)0x1000U)  /*!< Enable auto-negotiation function     */
+#define PHY_RESTART_AUTONEGOTIATION     ((uint16_t)0x0200U)  /*!< Restart auto-negotiation function    */
+#define PHY_POWERDOWN                   ((uint16_t)0x0800U)  /*!< Select the power down mode           */
+#define PHY_ISOLATE                     ((uint16_t)0x0400U)  /*!< Isolate PHY from MII                 */
+
+#define PHY_AUTONEGO_COMPLETE           ((uint16_t)0x0020U)  /*!< Auto-Negotiation process completed   */
+#define PHY_LINKED_STATUS               ((uint16_t)0x0004U)  /*!< Valid link established               */
+#define PHY_JABBER_DETECTION            ((uint16_t)0x0002U)  /*!< Jabber condition detected            */
+
+/* Section 4: Extended PHY Registers */
+#define PHY_SR                          ((uint16_t))    /*!< PHY status register Offset                      */
+
+#define PHY_SPEED_STATUS                ((uint16_t))  /*!< PHY Speed mask                                  */
+#define PHY_DUPLEX_STATUS               ((uint16_t))  /*!< PHY Duplex mask                                 */
+
+/* ################## SPI peripheral configuration ########################## */
+
+/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
+* Activated: CRC code is present inside driver
+* Deactivated: CRC code cleaned from driver
+*/
+
+#define USE_SPI_CRC                     0U
+
+/* Includes ------------------------------------------------------------------*/
+/**
+  * @brief Include module's header file
+  */
+
+#ifdef HAL_RCC_MODULE_ENABLED
+  #include "stm32f4xx_hal_rcc.h"
+#endif /* HAL_RCC_MODULE_ENABLED */
+
+#ifdef HAL_GPIO_MODULE_ENABLED
+  #include "stm32f4xx_hal_gpio.h"
+#endif /* HAL_GPIO_MODULE_ENABLED */
+
+#ifdef HAL_EXTI_MODULE_ENABLED
+  #include "stm32f4xx_hal_exti.h"
+#endif /* HAL_EXTI_MODULE_ENABLED */
+
+#ifdef HAL_DMA_MODULE_ENABLED
+  #include "stm32f4xx_hal_dma.h"
+#endif /* HAL_DMA_MODULE_ENABLED */
+
+#ifdef HAL_CORTEX_MODULE_ENABLED
+  #include "stm32f4xx_hal_cortex.h"
+#endif /* HAL_CORTEX_MODULE_ENABLED */
+
+#ifdef HAL_ADC_MODULE_ENABLED
+  #include "stm32f4xx_hal_adc.h"
+#endif /* HAL_ADC_MODULE_ENABLED */
+
+#ifdef HAL_CAN_MODULE_ENABLED
+  #include "stm32f4xx_hal_can.h"
+#endif /* HAL_CAN_MODULE_ENABLED */
+
+#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
+  #include "stm32f4xx_hal_can_legacy.h"
+#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
+
+#ifdef HAL_CRC_MODULE_ENABLED
+  #include "stm32f4xx_hal_crc.h"
+#endif /* HAL_CRC_MODULE_ENABLED */
+
+#ifdef HAL_CRYP_MODULE_ENABLED
+  #include "stm32f4xx_hal_cryp.h"
+#endif /* HAL_CRYP_MODULE_ENABLED */
+
+#ifdef HAL_DMA2D_MODULE_ENABLED
+  #include "stm32f4xx_hal_dma2d.h"
+#endif /* HAL_DMA2D_MODULE_ENABLED */
+
+#ifdef HAL_DAC_MODULE_ENABLED
+  #include "stm32f4xx_hal_dac.h"
+#endif /* HAL_DAC_MODULE_ENABLED */
+
+#ifdef HAL_DCMI_MODULE_ENABLED
+  #include "stm32f4xx_hal_dcmi.h"
+#endif /* HAL_DCMI_MODULE_ENABLED */
+
+#ifdef HAL_ETH_MODULE_ENABLED
+  #include "stm32f4xx_hal_eth.h"
+#endif /* HAL_ETH_MODULE_ENABLED */
+
+#ifdef HAL_ETH_LEGACY_MODULE_ENABLED
+  #include "stm32f4xx_hal_eth_legacy.h"
+#endif /* HAL_ETH_LEGACY_MODULE_ENABLED */
+
+#ifdef HAL_FLASH_MODULE_ENABLED
+  #include "stm32f4xx_hal_flash.h"
+#endif /* HAL_FLASH_MODULE_ENABLED */
+
+#ifdef HAL_SRAM_MODULE_ENABLED
+  #include "stm32f4xx_hal_sram.h"
+#endif /* HAL_SRAM_MODULE_ENABLED */
+
+#ifdef HAL_NOR_MODULE_ENABLED
+  #include "stm32f4xx_hal_nor.h"
+#endif /* HAL_NOR_MODULE_ENABLED */
+
+#ifdef HAL_NAND_MODULE_ENABLED
+  #include "stm32f4xx_hal_nand.h"
+#endif /* HAL_NAND_MODULE_ENABLED */
+
+#ifdef HAL_PCCARD_MODULE_ENABLED
+  #include "stm32f4xx_hal_pccard.h"
+#endif /* HAL_PCCARD_MODULE_ENABLED */
+
+#ifdef HAL_SDRAM_MODULE_ENABLED
+  #include "stm32f4xx_hal_sdram.h"
+#endif /* HAL_SDRAM_MODULE_ENABLED */
+
+#ifdef HAL_HASH_MODULE_ENABLED
+ #include "stm32f4xx_hal_hash.h"
+#endif /* HAL_HASH_MODULE_ENABLED */
+
+#ifdef HAL_I2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2c.h"
+#endif /* HAL_I2C_MODULE_ENABLED */
+
+#ifdef HAL_SMBUS_MODULE_ENABLED
+ #include "stm32f4xx_hal_smbus.h"
+#endif /* HAL_SMBUS_MODULE_ENABLED */
+
+#ifdef HAL_I2S_MODULE_ENABLED
+ #include "stm32f4xx_hal_i2s.h"
+#endif /* HAL_I2S_MODULE_ENABLED */
+
+#ifdef HAL_IWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_iwdg.h"
+#endif /* HAL_IWDG_MODULE_ENABLED */
+
+#ifdef HAL_LTDC_MODULE_ENABLED
+ #include "stm32f4xx_hal_ltdc.h"
+#endif /* HAL_LTDC_MODULE_ENABLED */
+
+#ifdef HAL_PWR_MODULE_ENABLED
+ #include "stm32f4xx_hal_pwr.h"
+#endif /* HAL_PWR_MODULE_ENABLED */
+
+#ifdef HAL_RNG_MODULE_ENABLED
+ #include "stm32f4xx_hal_rng.h"
+#endif /* HAL_RNG_MODULE_ENABLED */
+
+#ifdef HAL_RTC_MODULE_ENABLED
+ #include "stm32f4xx_hal_rtc.h"
+#endif /* HAL_RTC_MODULE_ENABLED */
+
+#ifdef HAL_SAI_MODULE_ENABLED
+ #include "stm32f4xx_hal_sai.h"
+#endif /* HAL_SAI_MODULE_ENABLED */
+
+#ifdef HAL_SD_MODULE_ENABLED
+ #include "stm32f4xx_hal_sd.h"
+#endif /* HAL_SD_MODULE_ENABLED */
+
+#ifdef HAL_SPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_spi.h"
+#endif /* HAL_SPI_MODULE_ENABLED */
+
+#ifdef HAL_TIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_tim.h"
+#endif /* HAL_TIM_MODULE_ENABLED */
+
+#ifdef HAL_UART_MODULE_ENABLED
+ #include "stm32f4xx_hal_uart.h"
+#endif /* HAL_UART_MODULE_ENABLED */
+
+#ifdef HAL_USART_MODULE_ENABLED
+ #include "stm32f4xx_hal_usart.h"
+#endif /* HAL_USART_MODULE_ENABLED */
+
+#ifdef HAL_IRDA_MODULE_ENABLED
+ #include "stm32f4xx_hal_irda.h"
+#endif /* HAL_IRDA_MODULE_ENABLED */
+
+#ifdef HAL_SMARTCARD_MODULE_ENABLED
+ #include "stm32f4xx_hal_smartcard.h"
+#endif /* HAL_SMARTCARD_MODULE_ENABLED */
+
+#ifdef HAL_WWDG_MODULE_ENABLED
+ #include "stm32f4xx_hal_wwdg.h"
+#endif /* HAL_WWDG_MODULE_ENABLED */
+
+#ifdef HAL_PCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_pcd.h"
+#endif /* HAL_PCD_MODULE_ENABLED */
+
+#ifdef HAL_HCD_MODULE_ENABLED
+ #include "stm32f4xx_hal_hcd.h"
+#endif /* HAL_HCD_MODULE_ENABLED */
+
+#ifdef HAL_DSI_MODULE_ENABLED
+ #include "stm32f4xx_hal_dsi.h"
+#endif /* HAL_DSI_MODULE_ENABLED */
+
+#ifdef HAL_QSPI_MODULE_ENABLED
+ #include "stm32f4xx_hal_qspi.h"
+#endif /* HAL_QSPI_MODULE_ENABLED */
+
+#ifdef HAL_CEC_MODULE_ENABLED
+ #include "stm32f4xx_hal_cec.h"
+#endif /* HAL_CEC_MODULE_ENABLED */
+
+#ifdef HAL_FMPI2C_MODULE_ENABLED
+ #include "stm32f4xx_hal_fmpi2c.h"
+#endif /* HAL_FMPI2C_MODULE_ENABLED */
+
+#ifdef HAL_FMPSMBUS_MODULE_ENABLED
+ #include "stm32f4xx_hal_fmpsmbus.h"
+#endif /* HAL_FMPSMBUS_MODULE_ENABLED */
+
+#ifdef HAL_SPDIFRX_MODULE_ENABLED
+ #include "stm32f4xx_hal_spdifrx.h"
+#endif /* HAL_SPDIFRX_MODULE_ENABLED */
+
+#ifdef HAL_DFSDM_MODULE_ENABLED
+ #include "stm32f4xx_hal_dfsdm.h"
+#endif /* HAL_DFSDM_MODULE_ENABLED */
+
+#ifdef HAL_LPTIM_MODULE_ENABLED
+ #include "stm32f4xx_hal_lptim.h"
+#endif /* HAL_LPTIM_MODULE_ENABLED */
+
+#ifdef HAL_MMC_MODULE_ENABLED
+ #include "stm32f4xx_hal_mmc.h"
+#endif /* HAL_MMC_MODULE_ENABLED */
+
+/* Exported macro ------------------------------------------------------------*/
+#ifdef  USE_FULL_ASSERT
+/**
+  * @brief  The assert_param macro is used for function's parameters check.
+  * @param  expr If expr is false, it calls assert_failed function
+  *         which reports the name of the source file and the source
+  *         line number of the call that failed.
+  *         If expr is true, it returns no value.
+  * @retval None
+  */
+  #define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
+/* Exported functions ------------------------------------------------------- */
+  void assert_failed(uint8_t* file, uint32_t line);
+#else
+  #define assert_param(expr) ((void)0U)
+#endif /* USE_FULL_ASSERT */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_HAL_CONF_H */

stm32f4xx_it.h

@@ -0,0 +1,66 @@
+/* USER CODE BEGIN Header */
+/**
+  ******************************************************************************
+  * @file    stm32f4xx_it.h
+  * @brief   This file contains the headers of the interrupt handlers.
+  ******************************************************************************
+  * @attention
+  *
+  * Copyright (c) 2025 STMicroelectronics.
+  * All rights reserved.
+  *
+  * This software is licensed under terms that can be found in the LICENSE file
+  * in the root directory of this software component.
+  * If no LICENSE file comes with this software, it is provided AS-IS.
+  *
+  ******************************************************************************
+  */
+/* USER CODE END Header */
+
+/* Define to prevent recursive inclusion -------------------------------------*/
+#ifndef __STM32F4xx_IT_H
+#define __STM32F4xx_IT_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Private includes ----------------------------------------------------------*/
+/* USER CODE BEGIN Includes */
+
+/* USER CODE END Includes */
+
+/* Exported types ------------------------------------------------------------*/
+/* USER CODE BEGIN ET */
+
+/* USER CODE END ET */
+
+/* Exported constants --------------------------------------------------------*/
+/* USER CODE BEGIN EC */
+
+/* USER CODE END EC */
+
+/* Exported macro ------------------------------------------------------------*/
+/* USER CODE BEGIN EM */
+
+/* USER CODE END EM */
+
+/* Exported functions prototypes ---------------------------------------------*/
+void NMI_Handler(void);
+void HardFault_Handler(void);
+void MemManage_Handler(void);
+void BusFault_Handler(void);
+void UsageFault_Handler(void);
+void SVC_Handler(void);
+void DebugMon_Handler(void);
+void PendSV_Handler(void);
+void SysTick_Handler(void);
+/* USER CODE BEGIN EFP */
+
+/* USER CODE END EFP */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* __STM32F4xx_IT_H */